隨著氣溫的降低，工業鍋爐作為滿足家用取暖需求的主要設備來說也逐漸進入到使用的高峰期中，但其實不管是現在還是之前工業鍋爐的非運行期，都要學會正確操作設備，工業鍋爐製造廠就是以此來保證設備進行運行期能夠正常運行。
在工業鍋爐非運行期的時候，工業鍋爐製造廠建議用戶將通至工業鍋爐水閥門、燃氣閥門、電源等一一關閉；而且這段時間不管是鍋爐還是管道，都不需要泄水，但需要時刻關注到注水壓力。
另外就是不要隨意更改、拆卸工業鍋爐的煙道；若是夏季要使用工業鍋爐提供熱水的話，可以將其調整到夏季模式，這樣就可以隻供應熱水不供暖，但不要忘了將鍋爐的出水溫度設置好，在用水點處直接打開熱水使用。
工業鍋爐在非運行期的操作要點基本這些，而它在運行期的操作事項也都已經介紹過了，接下來要看看工業鍋爐自身的一些配置，有哪些是不起眼但往往是十分重要，不可或缺的。
一個是工業鍋爐的擋渣裝置為，了不使爐渣落入爐排和延長爐渣在爐排上的留時間，鏈條爐排要裝擋渣裝置。還有一個是工業鍋爐爐排的張緊裝置，它是為了不使爐排在運行時拱起而設計的。
工業鍋爐製造廠指出由於工業鍋爐在運行過程中爐排須緊，所以張緊裝置成了必不可少的配件之一，牟其中鏈帶式依靠前軸、後軸將鏈條張緊，一般前軸是可調的；而橫梁、鱗式則依靠自重張緊，使得爐排保持穩定的運行。
As the temperature drops, industrial boilers, as the main equipment for household heating needs, are gradually coming to the peak of their use, but in fact, the correct operation of industrial boilers, industrial boilers, no matter now or before, The manufacturer is to ensure that the equipment can run normally during operation.
When the industrial boiler is not in operation, the industrial boiler manufacturer recommends that the user turn off the industrial boiler water valve, the gas valve, the power supply and so on one by one; and during this period, it does not need to drain any boiler or pipeline, but needs Always pay attention to the injection pressure.
In addition, do not arbitrarily change and disassemble the flue of an industrial boiler. If you want to use industrial boilers to provide hot water in summer, you can adjust it to summer mode so that you can only supply hot water without heating, but do not forget to remove the water from the boiler Set the temperature, the water point directly open the hot water use.
Industrial boilers in the non-operating phase of the basic points of these operations, and its operational aspects of the operation have also been introduced, and then look at some of the configuration of industrial boilers, what is humble but often is very important, indispensable.
One is the industrial boiler slag blocking device, so that does not make the slag fall into the grate and extend the stay of slag in the grate on the stay, chain grate slag device to be installed. There is also a tensioning device for the grate of industrial boilers designed to prevent the grate from arching during operation.
Industrial boiler factory pointed out that because the grate must be tight during the operation of the industrial boiler, the tensioning device has become an indispensable accessory. In the case of the chain, the chain relies on the front axle and the rear axle tensions the chain. Generally, the front axle Is adjustable; and beams, scales rely on self-tensioning, making the grate to maintain a stable operation.
